BUNNING AND ECE MUCK SPREADER PARTS.
Bunning and ECE muck spreader parts at competitive prices. For example, this RT500/50, bed drive gear box, same as Bunning Lowlander 120 and numerous other spreaders, or the RT500/60 for only £925 + VAT. We also have the RT800/60 at £1130 + VAT, while stocks last. Please specify input and output shaft sizes when ordering.
All these are on stock at the moment, July 2018.
We also have the Bunning Lowlander auger gear boxes, see below.
This and below is only a small selection of the parts we supply.
Hydraulic motor 160 UK pounds + VAT, while stocks last. Both these parts also fit several other makes of spreader.
Hydraulic motor, to fit this bed drive gear box, see below. Many of these parts also fit several other makes of spreader.
Bunning Lowlander Mk 1 auger gear box. The ones pictured are for 1000 RPM PTO, we stock these because they aren't easy to get, £460 each plus VAT etc. while stocks last. The ones pictured are identical to the originals, except for the extra shaft, however this shouldn't be a problem.
On stock at the moment, July 2018
540 RPM are usually available over night, direct to you from our supplier and much cheaper , please ask 01609 773 607.
These Rogelberg gearboxes are now taking a long time to get from Germany and they're expensive. We are working on an alternative solution, see below. The gearbox pictured is for 1000 RPM PTO and has a casing which splits in half, and 6 spline input shaft, but it's directly interchangeable with the earlier one, see below. We have these on stock at the moment July 2018. Click here for price.
Sorry this is complicated, these spreaders came with, I beleive, 8 different auger gear boxes.
The early machines had poor sealing on the top bearing, click here for more info.
Far right or below, depending on your device, is the old type ECE auger gearbox, no longer available. Thus far we are able to get parts for this gearbox. Near right is one of the 4 different pinions for this gearbox, 1000 PTO, 6 spline shaft. Click here for price.
Single piece gearbox conversion for ECE
The one piece gearbox is much better and more readily available than the original ECE ones. We are working on a conversion kit to fit these gearboxes to ECE spreaders, see below. We intend to fit this gearbox to one of our spreaders for testing. This will run the augers faster, so there may be a problem with balance, but the spread will be better and we are incorporating rubber shock absorbing couplings. Watch this space or ring 01609 773607.
Hydraulic motor for Bunning / ECE floor drive, £189 plus VAT etc. These motors also fit several other makes of spreaders. While stocks last.
This auger flighting is the same shape as Bunning Mk 4. We have used it successfully on earlier models and on ECE spreaders however the auger pitch and the teeth spacing is different. We have this on stock at the moment, July 2018. We can get the flighting for other modeles but we get it made abroad so it will take a while.
in Northallerton, North Yorkshire, for further information about our farming equipment.
RECEIVE PTO GUARDS FOR ONLY £26.50!
These bushes come in several sizes and materials: Bronze, cast iron, and composite. The metal ones are better but composite is fine for the idler shaft and maybe the non gearbox side of the drive shaft. Bronze seems to have gone out of fasheon. When ordering please specify material and all dimensions. Click here for bushes list If your bush isn't on the list please ask 01609 773607.
If you wish to order bed bars, please specify the dimensions x, y and z, see sketch right, these are the earlier chanel ones £26 each plus VAT and carriage. For the later Bunning Lowlander all box ones all we need is the overall length.
The box for the sockets on the chanel ones, is an unusual size so if you want to replace them make sure you get box with 5mm wall, or we can supply new sockets.
On our ECE spreaders we use bed chains with a larger pitch than origional. This allows us to use sprockets with thicker teeth, which we find is a big advantage as they last longer. We have also manged to use these sprockets on worn ECE chains, as the wear causes the chain to have a larger pitch. This can increases the lifespan of the chain, as the larger pitch of the sprockets better fits the worn pitch of the chains.
BUNNING / ECE BED DRIVE SPROCKETS
As you will be aware the drive shaft will need to come out in order to fit these,click here for tips on how to do this.
PLEASE NOTE: Use this advice at your own risk. We are not liable for any damages.
The genuine Bunning parts are made from High tensile steel and are very good on young spreaders, however we find that when spreaders get a bit of age on them the augers become weak, so hopefully these mild steel ones will bend when encountering stones, and thus reduce the stress on the auger. We can supply genuine if required. Please specify width and thickness when ordering, see below.
40 x 12mm, £5 each or £3.60 if you order more than 30.
50 x 12mm, £5.50 each or £3.90 if you order more than 30.
50 x 15mm, £6.50 each or £4.70 if you order more than 30.
Price for genuine to follow or please ask, 01609 773 607.
All prices plus VAT etc.
PLEASE NOTE: While stocks last. – Prices will be more if we can’t have your old ones back, in a repairable condition. – Other sizes are available, or we can have your old ones relined.